Bent reinforcing iron. 700 x 50 x 25 mm, 3 mm thick and powder coated.

Bent bracing iron 3 mm thick U-iron in powder-coated steel.

There is 1 variant:

– with a 45 degree edge at the ends. Which is angled so that it can be sawed down with a plunge saw or milled with a router.

Dimensions:

Length 700 mm

width 50 mm

total height 25 mm

thickness of iron 3 mm

If you make your own board, like these quality irons, you should also use a quality oil which can be found here: Oil Archive – DKU Living